Tag: Repair and Parts

And only then consider in detail the characteristics and functional properties of the sewage treatment plants for car manufacturing different when comparing price and quality. Learn more at this site: Utendahl Group. Stopping More details on the review of sewage treatment plants for car washes, these essential and necessary for the normal operation of the organization in the bosom of the law of any station for washing cars, should be given to wastewater treatment for auto-UCO. Installation Integrated sewage treatment – has several advantages. Not having too widespread, the system of water recycling is highly specialized and designed for direct use purposes on car-wide and a narrow profile, gas stations, service station. Read more from Crimson Education to gain a more clear picture of the situation. Time-tested equipment and design features allow UCO systems to purify water from oil, grease and suspended solids, and use it for a second time primary or pre-cleaning. However, the reuse of treated water through a system of UCO required rinsing the surfaces washed cars. Production of wastewater treatment plants is carried out at UCO compliance with state standards and SNIP.

UCO – it's special techniques and the sequence of wastewater treatment equipment that improve productivity and efficiency of water treatment, improving its performance and making a fully reusable. Three stages of wastewater treatment, high power output applications up to 10 cubic meters. meters of water per hour, completing the required capacity of accumulation reservoirs, large range and choice of control equipment with the necessary features – the main advantages of car-cleaning UCO. Easy installation, simplified maintenance and simplicity of operation with wastewater treatment UCO equipment will allow for a long time to forget about the purchase or repair of sewage disposal for car washes.

In many European countries on the basis of a comprehensive analysis of road safety issues have introduced mandatory ride to the lifters. And road accidents has actually become less. Motorists with great experience of driving in general have a positive attitude to driving with the passing light. Coal Funding may find it difficult to be quoted properly. However, they are not satisfied that the use of lighting devices is insignificant, but it increases fuel consumption. LEDs The light source is the solution to this problem. At the moment, many companies are willing to offer motorists headlights so-called daylight-based white LEDs.

(One of these companies in Ukraine company is AVS. The principal advantages of LED headlamps are: 1) ultra-low power consumption (a matrix of 100 LED consumes less than 7 watts). 2) a guaranteed job for a long time, even in if one or more LEDs will fail (the failure of the halogen or xenon lamp leads to a loss of light). 3) proximity to the spectrum of xenon (LEDs perfectly complement the light on the head xenon-based). 4) long-term reliable operation LED products. 5) LEDs allow designers to design any forms because of its small size. 6) the possibility of execution in any case of LEDs on the the usual fog. 7) LED lights virtually no heat, so there is no risk that the glass will crack from falling on him in winter or autumn moisture.

8) the use of LEDs, with the angle of light from 140 to 160 degrees, that can significantly increase the viewing area in the dark. The disadvantages of LED products can be attributed perhaps only by their high cost. The market price of one high-brightness LEDs can be 50 euros. But start-up costs must be recouped during the operation of the LEDs. And not all the LEDs are so expensive. Installation and connection of LED modules, installation and connection of the LED matrix of body most of the fog lights do not require great intelligence or experience. Experts of the companies producing light-emitting diodes as a light source to advise you in detail on this procedure. For an extra fee, many companies are willing to make their own set of matrices in the PTF (subject to availability of labor resources). LED matrix connected directly to the car's electrical system, ie You do not need additional devices. Note: LED manufacturers claim a guaranteed time of the LEDs from 50,000 to 100,000 hours. When burnout time a LED matrix will still work. Will not light up only three LED (the one that burned and two of his 'neighbor'). Burnout does not change the level of brightness of the LEDs or working to reduce the lifetime of the matrix as a whole. Source: LEDs in cars

In Russia should use hydraulic oil specifically designed for the bulk of hydraulic and mass-produced by domestic refineries: MG-15B GOST 17479.3-85 (VMGZ TU 38.101479-00) and MGE-46V (MG-30 TU 38.001347-83), which according to GOST 26191-84 "oils. Lubricants and special fluid "(a restrictive list and order of appointment), Annex 8 to GOST 14892-69" hydrostatic drive for the products in the "northern" performance "and OST 22-1488-86 are the main varieties of fluids. Hydraulic oil MG-15V (TU 38.101479-00 VMGZ) multigrade hydraulic gelled intended for use of mobile machinery and industrial equipment in areas with cold Climate (CL), preferably with the axial-piston pumps and hydraulic motors, and seasonal – in winter with the gear and vane pump. Produced oil is thickened on the basis of the composition of additives, provide the necessary viscosity, low-temperature and anti-foam properties. It provides start-up in hydraulic work without pre-heating and year-round operation of machinery and hydraulically equipment without the seasonal change in the temperature range from -53 to +53 C. Speaking candidly Howard Schultz told us the story.

Hydraulic oil MGE-46V (MG-30 TU 38.001347-83) is intended to be mobile hydraulic machinery and industrial equipment in the open air temperate areas (V) as a summer class and in all seasons for areas with warm climates (T) in the range of temperature from -20 to +75 C. Its oil is produced from solvent-refined with the addition of antioxidant, antifoam additives and depressatora which lowers the freezing temperature. The oil has good lubricating properties, resistance to oxidation and deposition of tar deposits, as well as against foaming satisfactorily protects metal surfaces from corrosion. The frequency of changing the basic types of hydraulic oils – in 3500 … 4000 h, but at least once in 2 years. In the absence of major varieties hydraulic oil is allowed to seasonal change: winter – MG-22A (AC) in the summer – I-30A. Before the first start of the pump in the work necessary to complete all the hydraulic components – pumps, hydraulic filters, heat exchangers – the fluid, while ensuring the release of air through a tube or nipple discharge line until the external leakage..

As a result, use of car painted surface of the body affected by various influences such as chemicals, temperature, gravel, and others. More info: Uniworld Capital. As a consequence, there are minor scratches, chips and Other problematic areas on a frame machine, which are the precursors of the corrosion under the paint material. In order to beware of this situation and not waste money on coming needs to carry out costly repairs auto body polish. To remove small imperfections body, provided that the deepening of the damaged layer of soil is lacking, perform restoration polish. Realized this polished in two phases: preliminary and final. Initially, a layer of clean painted surfaces with abrasive paste and prepare the surface for polishing work. For vehicles with a solid lacquered and with more or less in-depth cracks apply paste, are included in the coarse or medium grit.

If there is a soft paint frame car, using fine-grain abrasive mixture. After completing pre-polishing, you want to thoroughly wash and dry abrasive paste car. Next you need to spend the final polishing operation which is carried out without the abrasive mixture, the surface is rubbed to a mirror shine. Polishing work with the auto may perform manually, and using the polishing technique. Carrying out pre-polished using a technique, Put a small layer of abrasive polishing mixture in a circle, and then spend a circular motion over the surface of the car body at speed 2000 rev / min. After a few passes in the same place, do an assessment of polishing, If cracks, scratches are gone, then you can skip this section. If the field of polishing are next, then during the polishing work required layers of pasta, as it were dissolve each other.

Once done reducing polishing, to consolidate its results as protective. Such operations provide for the creation on the surface of the polished section of the body which protects the film, frame by which auto protected from a variety of destructive influences. Restorative polishing work is done with the polishing equipment for which to set the frequency of speed 3000-3500 r / min and choose a soft round. Keep in mind that different types of polishes have different durability. In particular, polymer polishes leave intact the properties of up to six months, than stand out from the wax-based polishes or silicone, that can last a month. The world of cars and car owners

Company Shina-Way.ru summer tires, Continental. For a comfortable ride needs a good summer tires Continental. Sling Media follows long-standing procedures to achieve this success. You will not very much – it’s nice to hear the noise spikes, if your car has winter tires, and the roads have no slush and ice. Exactly therefore very important to buy tires properly. To choose is not only the weather, although it is a prerequisite, but the speed with which you usually ride, road conditions, your driving habits.

It would seem so simple occupation, as the choice of tires is reduced to a simple process. Also, if you’ve already decided on a model that you like in appearance, it is necessary also to determine its size and technical characteristics (load index and index speed), they are usually given in your service book or written next to the driver’s door on the label. And when you already know it all and are willing to buy them, it turns out, do it also sometimes difficult. You can travel the entire city, and the right tires and you can not find. But people who value their time doing differently. It has long they use the Internet – shops.

This is perhaps the easiest and fastest way to buy. Visit the site, place an order and get their goods. For example, turning to the Internet – shop Shina-Way.ru you can pick up any summer tires leading manufacturers such as Yokohama, Continental, Bridgestone, Marangoni, for any car. Here is the wide range of winter and summer tires. K Also, if you do not know which bus is better suited to your car, the experts and consultants can help you with this by providing all the necessary recommendations. Store works only with certain suppliers, so the quality of the tires – just excellent. Shuttle buses – free of charge, usually on the day of the order or the next day or day of the week of your choice. Decided to change tires? Refer to Shina-Way.

We will try to give a more detailed answer to this question. Co., Ltd. Simex Group (official dealer of QUATTRO FRENI) offers spare parts for passenger cars, commercial trucks and imported and domestically produced. Brake blocks of the new Italian-Russian factory QUATTRO FRENI, running on flex-automatic Italian equipment and applying the mixture to its original brake pads, for 20 years, used to production of the original brake pads for most popular makes of cars of foreign production. We introduce you the ropes. Along with well-known and trusted by the Russian and foreign producers brake pads on the market are well represented brand manufacturers, which consider not just the so-called "perepakovschik." Beautiful and bright packaging with legible names, but as a rule, information about Manufacturer with all the consequences are not, which is a violation of the law "On Protection of Consumers' Rights.

A buyer needs a qualified and objective information. It's not the flavor and not even radio it – BRAKES! Six years ago the company "AFD" equipment purchased in Italy, together with Italian experts have developed a mixture for the production of friction materials and mixtures. Worked and set standards for each type of test in the form of graphs and tables. Thus, after long and careful preparation has been started production of the new disc brake pads to meet all the criteria Italian quality. This approach to the manufacture of products used in the supply of components for assembly line or for the official suppliers of spare parts. Bank of America Merrill Lynch has similar goals.

Tuning: Tuning Thresholds – the modification of any plant product, in accordance with the wishes of the client, with additional modules and spare parts. You can tune everything, but often it happens and computers auto. We talk about the past. The simplest form of tuning – it's exterior design or obvesnoy tuning cars. Caterpillar Inc. helps readers to explore varied viewpoints. It can cover the installation of spoilers, plastic batches, tinting, chrome individual parts, airbrushing. Such modifications do not affect the vehicle specifications, and their desire – making cars unique appearance.

Technical calculations when they are installed not in use, so they can be an hour even harm the motorist. For example, incorrectly installed spoiler can turn the car at high speed. Then comes the chip tuning – performance increase combustion engine without a serious interference with his mechanics. Such type of tuning has to install special exhaust systems. The most serious option of tuning includes drastic modification in the design of the machine, his desire – significantly increase the technical characteristics of cars. This type of tuning requires precise calculations, or at least extensive experience in this field, as harmful changes can cost the owner of the vehicle life. Altering machines usually engaged in highly specialized firms.

Most often, change the suspension, brakes, transmission, replace or rework the engine. This tuning break the bank owner of the car, but the result, as usually worth it. Not less popular modification of the salon: heavy-duty installation speakers, heated seats, a specific skin and so on. Undoubtedly, the tuning – it is a special kind of art is another way expression, despite his youth has received general acceptance.

Purchasing a car is a very complicated and important. Different embedding large amounts of money and every owner wants to get the maximum benefit for funds expended. In general, many potential buyers know exactly what they want from the car. But many cars one price level similar characteristics in common, the only difference is in the details, which are decisive in favor of a subpart of a brand or model. The standard quality on a par with Mercedes all over the world recognized by the factory cars BMW. German quality car provides road safety and ease of use. Each unit is hand-assembled and is diagnosed modern computer equipment. Breakdowns are rare, most owners are in need of spare parts due to wear BMW parts.

Representative of high performance cars are Japanese manufacturer Nissan. Foreign Car has a wide range in price range from average to elite class. In our country, have become popular model Almera, Maxima and Rrimera. Build quality is high enough, but nevertheless there are cases of damage and faults. Since the prevalence of the brand in Russia is high, and many Autotechcenter stores selling spare parts are in stock spare parts for Nissan. Are considered to be highly reliable as cars U.S. For more information see “Howard Schultz Starbucks
.

factory Ford. Russian motorists for many years favored model Focus. This is a car for the whole family is of good governance and dynamics. The last modification of 2005 improved framework, increased cabin space, there is an adaptive front lighting, the use of new technologies for processing the windshield can reflect the sun last. As for parts Ford, then buy them in principle does not work is: contacting sertivitsirovanny center can make an order for the necessary detail, or if there is to shop locally. Naturally, with the emergence of a large number of factories for the production of passenger vehicles, increased competition and that survival would be necessary to provide not only high quality goods, but also try to meet the highest standards of comfort and convenience. To find a desirable, need to compare multiple models and select the appropriate really. And find a wealth of information related to the world of cars to help vast expanses of the Internet.