The choice of car lifts is not easy, but as a rule wizard already know what platforms they need. Sometimes there are small problems, but usually because of lack of information. Automotive lifts are fixed, mobile and kanavnye. Stationary lift platform and fall into rack, kanavnye – by moving on rails (padded on the bottom of the ditch), and the guides (padded on the edge of the gutter), ie overhead lifts. By type of drive lifts are divided: electromechanical, hydraulic, pneumohydraulic. One of the most popular models of automotive lifts for commercial vehicles businesses, this model PP-16. These lifters have several advantages: 1.
The lift is podkatnym, it can be used on multiple jobs, 2. Rack lifts roam freely, they can be installed under different machines. 3. Possibility of optional equipment for the pickup vehicle traverses over the frame. Traverses equipped with rollers (to move) and mobile stops. 4. Small footprint for storage. 5.
Multilevel security. 6. Value. Specifications lifts: car lifts Model: PP-6 PP-10 PP-16 PP-20 Capacity: 6t., 10t., 16t., 20t. Height: 1600 mm (for PP-6 to 1700 mm) pickup method: for Wheel Power: 6 kW, 6 kW, 8.8 kW, 12 kW. Number of racks: 4 pcs. Motor: 4 pieces. Lifting speed: 0.31 m / min., 0,5 m / min., 0,5 m / min., 0,65 m / min. Overall Rack: 960h1290h 2900mm (for PP-6 920h1210h 2900) Weight: 1360kg, 1360kg, 1860kg, 1800kg. For passenger transport companies (Passenger cars, 'Gazelle'), we can recommend a lift from the same series, PP-3. Pdemnik PP-3 – is an electromechanical podkatnoy lift. The lift is designed for lifting vehicles 'Gazelle' for all car with a body mounted on the frame and cars. Car Lift 'Gazelle' and frame vehicles lift PP-3 from the front and rear spars of the frame or, as the rise of passenger cars carried on the sides of the poddomkratnye site. Design features of the lift PP-3: 1. The drive spindle of the worm gear. 2. The design of the gear motor is applied from the worm wheel low-noise pa. 3. Carriage with a fixed thereon rotary beam travels in a convoy on the slide increased wear resistance and low friction coefficient. 4. Operating nut made of polyamide strength. 5. Lead screws are made by rolling the lift increases their service life. 5. The lift is equipped with limit switches pressure action limiting move the carriage up and down. 6. Fits on permitted floor with specific pressure on him more than 10 kg/cm2. Benefits lifts PP-3, the same as in the PP-16. Specifications automotive lift PP-3: Capacity: 3t. Maximum lift pickup above floor level 1900mm, minimum height from the floor picked up 180mm, installed capacity of 3 kW, racks Number 2 pcs. Number of motors 2 pcs. Supply voltage 380V. Lifting time on full height 80c Dimensions rack 1400h1180h2900mm Weight 830-900 kg.