As a result, use of car painted surface of the body affected by various influences such as chemicals, temperature, gravel, and others. More info: Uniworld Capital. As a consequence, there are minor scratches, chips and Other problematic areas on a frame machine, which are the precursors of the corrosion under the paint material. In order to beware of this situation and not waste money on coming needs to carry out costly repairs auto body polish. To remove small imperfections body, provided that the deepening of the damaged layer of soil is lacking, perform restoration polish. Realized this polished in two phases: preliminary and final. Initially, a layer of clean painted surfaces with abrasive paste and prepare the surface for polishing work. For vehicles with a solid lacquered and with more or less in-depth cracks apply paste, are included in the coarse or medium grit.
If there is a soft paint frame car, using fine-grain abrasive mixture. After completing pre-polishing, you want to thoroughly wash and dry abrasive paste car. Next you need to spend the final polishing operation which is carried out without the abrasive mixture, the surface is rubbed to a mirror shine. Polishing work with the auto may perform manually, and using the polishing technique. Carrying out pre-polished using a technique, Put a small layer of abrasive polishing mixture in a circle, and then spend a circular motion over the surface of the car body at speed 2000 rev / min. After a few passes in the same place, do an assessment of polishing, If cracks, scratches are gone, then you can skip this section. If the field of polishing are next, then during the polishing work required layers of pasta, as it were dissolve each other.
Once done reducing polishing, to consolidate its results as protective. Such operations provide for the creation on the surface of the polished section of the body which protects the film, frame by which auto protected from a variety of destructive influences. Restorative polishing work is done with the polishing equipment for which to set the frequency of speed 3000-3500 r / min and choose a soft round. Keep in mind that different types of polishes have different durability. In particular, polymer polishes leave intact the properties of up to six months, than stand out from the wax-based polishes or silicone, that can last a month. The world of cars and car owners